Multi-Use Primer light cured dentin and enamel bonding agent. Can be used with porcelain, metals, and amalgam. No-mix formulation works well in a moist environment.
1- 8ml bottle
3M Adper Single Bond 2
The 3M Adper™ Single Bond 2 is an adhesive of great quality for dental use. Leveraging the proven clinical history, ease of use, and high bond strength performance of Adper™ Single Bond Adhesive, the improved adhesive incorporates a nanofiller technology that contributes to higher dentin bond strength performance.
3M Filtek™ Z250 Composite Syringe
Filtek™ Z250 universal dental restorative is an esthetic, light-cured restorative designed for use in both anterior and posterior restorations. This tooth-colored filling material offers:
Low polymerization shrinkage
Filtek™ Z250 restorative provides the lowest polymerization shrinkage compared to several other leading products for less stress on the tooth and less sensitivity potential for your patient.
Speed and convenience
Available in easy-to-use direct-delivery capsule to save time. A light-cured dental restorative that cures in just 20 seconds for most shades. This dental composite is easy to finish to a smooth surface.
Provides exceptional resistance to slumping for easier handling.
Useful for both anterior and posterior restorations. Indicated for direct and indirect dental restorations.
Filtek™ Z250 universal restorative gives you strong, long-lasting and natural-looking tooth restorations.
Refill Includes: 1- 4gm Syringe
3M Filtek™ P60 Composite Syringe
Filtek P60 posterior restorative is an esthetic, light cured, radiopaque composite specifically designed for use in posterior direct or indirect restorations.
The matrix of this composite is a resin consisting of BIS-GMA (Bisphenol A diglycidyl ether dimethacrylate), UDMA (urethane dimethacrylate), and Bis-EMA (Bisphenol A polyethylene glycol diether dimethacrylate). This light-cured resin is filled with 61% (volume) silica/zirconia. The filler particle size distribution is 0.01 µm to 3.5 µm with an average particle size of 0.6 µm.
Filtek P60 exhibits about 25% less volumetric shrinkage upon curing than 3M™ Z100™. An example from the manufacturer shows shrinkage of 1.8% after 5 minutes and 2.0% after 30 minutes; sample geometry will effect actual values. Wet fracture toughness is 1.5 MN/m. The wear rate in an in-vitro 3-body wear test gives 4.0 µLoss/39,000 cycles.
Refill Inlcudes: 1- 4gm Syringe
3M Filtek™ Z100 Composite Syringe
A light-cured hybrid composite resin with a clinical history for use in both anterior and posterior restorations.
Unique, single filler is 100% zirconia/silica which allows more particles per gram of paste, resulting in excellent strength and wear resistance.
Excellent handling characteristics allow for easy placement and a lack of resin stickiness so the material will release easily from your instrument.
Addresses the opacities of both dentin and enamel, minimizing shade-matching guesswork and allowing better blending with natural tooth color for superior esthetic results.
Versatile material is ideal for both anterior and posterior restorations.
Refill includes 1 – 4g syringe
Versatile, multi-purpose adhesive that can be used for total-etch or self-etch techniques. Bonds reliably to all surfaces without an additional primer.
Indicated for both direct and indirect restorations; bonds light cured composites and compomers to dentin and enamel. Can also be used for root surface desensitization, as a protective varnish for glass ionomer restoratives, or to seal dentin prior to amalgam restorations.
- – One-step, one-coat, 35-second application.
- – Consistent bond strength to both moist and dry etched dentin.
- – Virtually no post-op sensitivity, regardless of technique.
- – Effective on all surfaces; high bond strength to all indirect surfaces (zirconia, alumina, glass ceramics and metals) without a separate primer.
- – Excellent marginal integrity for highly esthetic restorations.
- – Choose from unit dose or flip top vial with unique nozzle design for dispensing control.
- – No refrigeration needed.
1- 5ml bottle
Out of stock
3M Z250 Composite Compules
Universal Microhybrid Restorative.
20 compules/pkg. (.20g ea)
Clearfil S3 Bond Plus is a light-cure, self-etching, one-step, fluoride-releasing bonding agent. Based on the same progressive adhesive technologies from the gold standard Clearfil S3 Bond, you can expect minimal postoperative sensitivity. With its one-bottle liquid, Clearfil S3 Bond Plus dramatically simplifies bonding procedures. Along with Kuraray’s MDP technology, a new catalyst has been adopted; thereby, providing higher bond strength with improved working time.
SAME FEATURES AS CLEARFIL S3 BOND
- – Swift and Simple: No-Shaking, No-Mixing, No Scrubbing, No Multiple Applications
- – MDP Technology Provides a Water-Resistant Chemical Bond to Enamel and Dentin without Etching
- – Perfect for Root Surface Treatment and Cavity Sealing
- – Virtually No Post-Operative Sensitivity
- – Fluoride-Releasing
- – New Integrated Catalyst for Advanced Bond Strength
- – Post Cementation and Dual-cure Core Build-Ups using Clearfil DC Core Plus
- – Clearfil Bonding Agent
- – Microapplicators
- – Mixing wells
Dentin Enamel Bonding Resin
A 5th generation, single component, multi-use adhesive, which is hydrophilic and suitable for use on moist dentin (wet bonding technique). The adhesive incorporates aspects of primer and bonding resin in a single bottle designed to bond composites and compomers to dentin and enamel as well as treated amalgam, metal and ceramic surfaces. After etching, penetration and saturation of the dentin and enamel are accomplished in 2 to 3 coats.
38% Phosphoric Acid
Etch-Rite is a superior quality dental etching gel specially formulated for maximum working and handling characteristics.
- – Thixotropic
- – Stays where placed – will not run onto exposed tissue
- – Washes off easily without leaving any residue
- – 15-second etch
- – Convenient syringe dispensing
- – Precise placement through small-gauge pre-bent applicator tips
- – 4 x 1.2 mL syringes gel
- – 8 pre-bent tips