Log In

Impression Components

smart-one-piece-table

CO-8050_Big

Direct Pick-up Snap-on Coping (Closed tray)

Used to make a closed tray, implant level impression. Snap- on techniqe.

 

Catalog No.: CO-8050
Connection Type: Internal Hex 3.5
Height: 9 mm
Material: Stainless Steel

CO-8055_Big

Direct Pick-up Snap-on Coping (Closed tray)

Used to make a closed tray, implant level impression. Snap on techniqe.

 

Catalog No.: CO-8055
Connection Type: Internal Hex 3.5
Height: 13 mm
Material: Stainless Steel

CO-8080_Big

Indirect Short Transfer Coping (Closed tray)

Used to make a closed tray, implant level impression. Packaged with abutment screw CO-S040.

 

Catalog No.: CO-8080
Connection Type: Internal Hex 3.5
Diameter: 4.7 mm
Torque Tightening: Hand Tightening
Driver: 1.25 Hex Driver
Height: 9 mm
Material: Stainless Steel

CO-8070_Big

Indirect Short Narrow Transfer Coping (Closed tray)

Used to make a closed tray, implant level impression.
Packaged with abutment screw CO-S040.

 

Catalog No.: CO-8070
Connection Type: Internal Hex 3.5
Diameter: 3.8 mm
Torque Tightening: Hand Tightening
Driver: 1.25 Hex Driver
Height: 9 mm
Material: Stainless Steel

CO-8085_Big

Indirect Transfer Coping (Closed tray)

Used to make a closed tray, implant level impression.
Packaged with CO-S070 screw.

 

Catalog No.: CO-8085
Connection Type: Internal Hex 3.5
Diameter: 4.7 mm
Torque Tightening: Hand Tightening
Driver: 1.25 Hex Driver
Height: 13 mm
Material: Stainless Steel

CO-8075_Big

Indirect Narrow Transfer Coping (Closed tray)

Used to make a closed tray, implant level impression. Packaged with CO-S070 screw.

 

Catalog No.: CO-8075
Connection Type: Internal Hex 3.5
Diameter: 3.8 mm
Torque Tightening: Hand Tightening
Driver: 1.25 Hex Driver
Height: 13 mm
Material: Stainless Steel

CO-8060_Big

Indirect Transfer Coping (Open Tray)

Packaged with compatible screw which not available separately. Used to make an open tray, implant level impression.

 

Catalog No.: CO-8060
Connection Type: Internal Hex 3.5
Diameter: 4.7 mm
Torque Tightening: Hand Tightening
Driver: 9 Hex Driver
Height: 13 mm
Material: Stainless Steel

CO-8065_Big

Indirect Transfer Coping (Open Tray)

Packaged with compatible screw which not available separately. Used to make an open tray, implant level impression.

 

Catalog No.: CO-8065
Connection Type: Internal Hex 3.5
Diameter: 4.7 mm
Torque Tightening: Hand Tightening
Driver: 1.25 Hex Driver
Height: 13 mm
Material: Stainless Steel

Translate »